So, I’ve made it no secret that last September, I added “mama” to my resume. Today I’m going to take a break from churning out my usual business-y fare and give you a little peek into the nursery we created for our little one, Hazel. I hope you enjoy!
Hazel is 8 months old now, and it’s slightly humorous to look back on my preggo days and how frantic I was about getting her room ready. I really wanted everything to look perfect and fit the color scheme and yada yada. I had the diaper station ready to go, the sheets washed…everything in its place. Little did I realize that Hazel wouldn’t be sleeping, or barely even hanging out, in this room until she was like 6 months old. But oh well. You have to keep the crazy pregnant lady busy doing something, am I right?
I wasn’t really feeling having a set “theme” for her room, so I just went with a cohesive color scheme of mint and pint, with touches of gold. I didn’t want anything to blatantly girly, so we went with mint. Obviously there’s lots of white too.
shelf wall close up
We’ve got a nice sturdy bookshelf with baskets full of toys. I had some little 4×4 inch canvases hanging around and painted them in ombre shades of pink, then glued some cute little doilies to them. The white wooden rocking horse was made long ago by my grandfather, who passed away when I was just a kid. My husband had the great idea to let Hazel paint it when she’s a little older, so for now it chills on a little wall shelf we got from Target. I re-covered an ikea lampshade in some cute fabric, and most of the other objects I found thrifting. I purposely went out and tried to find some nice gold-colored vintage pieces to add some character to the space.
Here’s a close up of the collage/art wall above her crib. I searched for items that would match the color scheme and be appropriate for our baby girl and our family. I am absolutely Disney-obsessed, so I knew I had to have some sort of Disney shout-out included! I made the yarn-wrapped H initial myself and added some cute little flowers made of canvas ribbon, lace, and vintage buttons. So fun!
I’ve since had to take down the mobile (for now) because it turns out mobiles keep babies awake, instead of sleeping peacefully! Haha. I covered two corkboards from Ikea with coordinating fabric, and the rest of the artwork I ordered from Etsy.
I was so obsessed with everything matching that I made my poor husband replace the previously dark wooden ceiling fan with an all white one. Here you can also see the gold curtains that I searched forever to find (we settled on gold blackout shades from Overstock.com), and our Larkin PBK diaper changing station and dresser. This corner also now houses our tan Lazy boy recliner (which I love). Nursing took so long the first few months that we kept it downstairs in the living room…so I could watch TV while nursing of course.
Here’s Hazel’s bathroom. It used to be painted beige, but I convinced my husband to paint it white. Which I think was sort of a mistake, since all the cabinets and counter tops in here are cream. So now it’s sort of like mismatched white/cream overload. But oh well…we’ve made it work.
I found the awesome pink & mint frames from Homegoods (love that store, who doesn’t?). The prints are also from Etsy shop CarolineMint. The embroidered bear art used to hang in my nursery when I was a petite bebe, and my mom handed it down to me. It happened to already match our mint scheme, so I just painted the frame gold and voila!
The masterpiece of the bathroom is my DIY heart made of buttons. This was fun and easy to make, just a question of finding lots of pink buttons, and Hazel LOVES it. Anytime she’s having a cranky moment I can just bring her up to it and she loves poking and pointing at all the tiny buttons. I call that a handmade success.
DIY heart button art
Thanks for joining me on a little tour of Hazel’s mint & pink nursery! Now back to our regularly scheduled content 🙂
So I guess my blog has not been very heavy on the tutorials, but I do have one DIY project I did (with the help of my husband) that I’d really like to share! So here goes my attempt at writing a DIY tutorial.
When my husband and I first moved into our new house last year, we were excited by all the space we were going to have. Going from a 1300 square foot apartment to a 2500 square feet home meant lots and lots more space to enjoy!
However, one thing that sort of confused me was the fact that we were going to have two “living” rooms. Living room, den, family room, whatever you want to call them, our new house had two. The back of the house has an open kitchen, a breakfast nook, and a large space for an open living room. This is sort of the heart of our home, and we chose this living room to be the place where we set up our nice, big comfy u-shaped couches and our entertainment center with the television.
That left us with the question…what do we do with this huge front living room? When you enter the front door of our house, you are greeted with a large open dining room and living room (a column separates the two areas), along with the stairwell going up to the second floor. Since we already had our couches and media in the back living room, we weren’t sure what to do with the front one.
There were lots of possibilities, but I eventually decided that I’d like to make it a library of sorts. The wall of just the living room section was about 15 feet long. I envisioned a posh space with a couple of fun couches, floor lamps, a cozy rug, and a long row of lovely custom built-in shelves filled with books and other special mementos.
Back to reality, we just dropped our savings on a house. Not really any spare pocket change for fifteen feet of nice custom built-in wall to wall bookshelves.
Enter our Ikea hack. We are definitely not the first homeowners to have used Ikea bookshelves to create built-in looking bookshelves, but I like to think we put our own special touch on the project.
Here’s how we did it:
1. First, we bought lots and lots of Billy bookshelves. I spent a while on the Ikea website looking at the different variations and measurements of the Billys that are offered. Billys are pretty much the most basic shelving system Ikea offers, you could go with some of the other choices if you preferred, but we wanted something simple that we could add on to however we wanted.
The Billy system comes with lots of options. You can have skinny Billys, wide Billys, Billys with glass doors or wood doors. Billys in all shapes, sizes, and colors!
Your basic Billy bookshelf
Skinny Billy on a diet
We lucked out because for our space, a combo of four wide Billys and three skinny Billys fit almost perfectly. If you want to try this project, make sure you measure your space first. Ikea even offers a build your own option on their website, so you can see what combo of shelving units will work in your space and what it will look like.
We also bought the height extension shelving pieces for each unit. This was basically just something that added an extra shelf to the top of each Billy, making our wall-to-wall bookshelf a little taller.
How exciting, a Billy shelf extension unit
Most importantly, do NOT forget to include the baseboard molding in your calculations. Your wall-to-wall length may be 15 feet, but you need to subtract a couple inches to account for your molding, unless you plan on removing it to slide your bookshelves in. I’ll tell you how we dealt with our molding soon.
Altogether, the purchase of the shelves cost us just under $500. Not cheap, but when you consider you’re getting fifteen feet of bookshelf, not too bad either (especially when you think about how much custom work would’ve cost).
2. My next step was to assemble all the bookshelves. This was not fun. Mostly because there were 7 of them and it was pretty overwhelming.
I really wanted to add something special to these shelves. The back of a Billy bookshelf is basically a long sheet of particle board, aka, cardboard. It doesn’t look nice. White painted creased cardboard doesn’t fly with custom built-in bookshelves.
I knew I wanted to decorate the backs of the shelves, but did I want to paint it? Wallpaper? Fabric? My first instinct was to wallpaper them, but I had a hard time finding some economical wallpaper. Plus, I’ve never worked with wallpaper before in my life…so I went with fabric. I figured I could staple or glue fabric to the back of each board and give my shelves some extra pizzazz.
My next challenge was figuring out where in town I could by fifteen square feet of the same fabric. Not sure why I didn’t just buy online, but I ended up roaming through JoAnn’s one day. I couldn’t find several bundles of the same fabric, but I did find multiple bundles of the same pattern in two different colors. I bought everything they had and hoped it’d be enough. Obviously I’m really good at well-thought out projects, right?
I set to work on covering the particle backboard of each Billy with fabric. I placed the fabric pattern-faced down on the floor, put the particle board on top of it, and cut the fabric so it had about two inches of excess on all sides. I then hot glued these edges on the back of the particle board, being careful to evenly stretch the fabric as I glued.
Two things here, first, I don’t know if I’d recommend using hot glue as I did…How long will hot glue hold fabric to cardboard? These book shelves are here to stay, so hopefully my fabric will stay in place…forever. I would maybe add some staples or something to make this more permanent. Second, be careful what sort of fabric you choose. My fabric was heavily patterned, and any extra stretch in one area was really obvious in my final product, making the pattern not line up all the way across my shelves sometimes (but nothing too bad, no worries).
Once I got my backing all situated, we could finish completing the assembly of each unit. You sort of slide the cardboard backing in notches on the back of the unit, so that will also help hold my fabric in more permanently.
Here’s my husband nailing the back board to the shelving unit. You can see my fabric edges peeking around.
3. Next it was time to set up all the units on the wall. Nervous! Will they fit? This can be slightly stressful because, let’s face it, you’re working with Ikea products here. Plus you put them together. Things can be a little crooked, a little uneven, etc. Luckily, we didn’t seem to have any major problems…
My husband used L-brackets to attach the top of each unit to the wall, just to up the safety factor. Especially needed in houses with small kiddies or rambunctious doggies.
Work in progress
Ta Da! Do you spot my serious mistake?
Here is our new wall-to-wall bookshelf. It took me a while to figure out the best color pattern, but I think it worked out well.
At this point, I realized I had put one of the pieces on backwards (see top right corner skinny shelf), but as everything was all nailed together and what not, I could not fix it. No biggie since we planned to cover the shelves with trim and molding.
Bonsai doggie Leo is a shelf accessory
4. Once our unit was up, we measured the gaps on the ends between the shelves and the wall (caused mainly by our molding on the baseboards), measured the distances between shelves, and measured the distance from the floor to the top of the bottom shelf. This way we knew how big/small the trim we bought needed to be. We spent a long time at Home Depot mulling over what sort of molding and trim we wanted. We went with a really basic trim for all the edges except the bottom, which was more substantial.
One weekend when I was miserably working at the office, my loving husband spent an afternoon painting all the trim white and nailing them to the shelves. Basically the edges of each bookshelf got trim, so there was “double trim” between shelves, does that make sense? You could also buy thicker trim that covered the edges of two bookshelves totally. We didn’t put trim on the edges of the shelf ledges themselves, since most of them are movable and we might want to adjust them someday.
Here’s the unit once we added molding and trim:
Leo admiring our handy work (no he just loves those peacock feathers for some reason).
Please ignore the paint splotches on the left, we were still figuring our what color we wanted!
You can see we still have a slight gap between the wall and the unit. It sort of ruins the custom built-in facade, but the logistics of getting it perfectly flush with the wall were too difficult and we think it looks just fine 🙂
5. To complete the look, my husband wired in some overhead lighting. Before installing the last shelf, he dropped a plugged-in extension cord behind the shelves so we could have some lighting.
6. Decorate, decorate, decorate! I spent a long time playing around with the adjustable shelves. I didn’t want the unit as a whole to look too symmetrical. I made sure to put my heaviest books and display items along the bottom or middle shelves, the ones that weren’t adjustable, since they are probably the strongest. I had a lot of fun just going to Hobby Lobby and buying cute items for display – vases, frames, bird cages, candles, bookends…My favorite item is the turquoise vase with the peacock feathers, right in the middle of the unit. You may also notice that many of my display items are things I’ve bought from Etsy!
Once I put all my books on the shelf, I was amazed at how it suddenly looked like I owned no books, just because the shelf was so huge. I look forward to having tons of space for our library collection to grow.
Other than painting, this was the first major project we undertook for our new house. It was a lot of work, but definitely worth it. I love the extra pop that the fabric backing adds to the shelves. When we have guests over, the wall-to-wall library is usually one of the first things they notice. We finally got couches (like, 11 months later!) for the room, so hopefully we will be getting more use out of our library soon.
I hope you enjoyed this tutorial! Please let me know if you have any questions.
I’m so excited to share my Pinterest Thursday: I Tried It! Project with you all today.
In preparation for my upcoming craft shows, I’ve given a lot of thought to how I can display my jewelry at my booth. Since I’m sort of just testing the waters here, I don’t want to spend too much money on jewelry display items and new pieces. So, I’ve been trying to figure out inexpensive ways to set up my booth and show off my inventory while still having a cute, unique, attention-grapping display. I’ve been gathering ideas at my Craft Show Display Ideas board on Pinterest (check it out!).
I’ve got of all sorts of frames and boards and foamy things to hang my necklaces and earrings from, but rings are a different story. Bring in this wonderful little pin I found:
The pin is for a tutorial on how to make your very own ring display box/tray/thing from a cutlery tray. Now rewinding, when we first moved into our house, I bought a new cutlery tray for the kitchen, only to find that it was slightly too big to fit in our drawer. I threw it in the back of my car to eventually return to Bed, Bath, and Beyond, but let’s face it, that place can sometimes seem like the 6th circle of hell, and I don’t like going in unless I have $250 lying around that I want to throw away.
Thus, much to the annoyance of my husband, I never made it around to returning the cutlery tray. Fastfowarding, when I saw this tutorial, I was like, AHA! Finally something I can do with that tray! Now I can make a super cheap ring display box AND avoid ever stepping into Bed, Bath, and Beyond.
The main two items you need are any sort of cutlery tray type thing, or just a plain tray, and some upholstery foam, which I found at Joann.
Some scissors and a box cutter or a knife are also helpful, along with some relatively thick fabric. If your fabric is too thin, you’ll be able to see the green foam through it.
Use your scissors or a knife to cut out foam pieces to fit in the cutlery tray divisions, or, if you’re lucky, one big piece for a regular ole tray. In the pinned tutorial, she uses just one big tray, so it’s a lot easier. Sadly I was working with a tray with lots of divisions, so I had a lot of cutting to do. I was sort of worried my final result might look odd with all the divisions, but I think it turned out just fine (you’ll see soon).
Here’s my box with the foam pieces fitted in. I then took my box cutter (you could use a sharp knife too) and started slitting lines through the foam where I wanted to be able to sit the rings. I sliced the lines about half-way into the depth of the foam, and I tried to keep my lines straight (but didn’t really succeed) and evenly spaced.
After I was done cutting lines, I took my fabric and cut it into pieces, and basically stuffed in into the sliced lines, folded it under the pieces of foam, and stuffed it all into the box. I used the point of my scissors to really stuff the fabric in there and make it as taut as I could get it. I chose a basic neutral colored muslin fabric. I planned to paint my tray a bright green and I really wanted my rings to be able to pop against a non-distracting background. Obviously, you can have fun with the fabric and color scheme and make it match your bedroom or branding or whatever.
After spraypainting the tray green (and thus restuffing all the foam pieces), this was my final result:
Yeah, some of my lines aren’t straight, and my fabric is a little wrinkly in places, but once this baby is full of rings I think it’s going to look great! I also love the green color. I can’t wait to see it on my craft show table full of shiny things! The only bad thing is that when I made it, I realized how many rings I need to make to fill it up! I put EVERY ring I currently have for sale on it in this picture, and you can see it’s like….1/5th full! I have a LOT of work to do!
I think this is a great project even for non-craft show vendors. You could make one of whatever size you want for your own personal ring collection and show it off on your dresser or vanity. It’d also make a cute handmade gift for a friend!
This week I wanted to try a cute pin I found a while ago on Pinterest, of a map made out of scrapbook paper for each state. [Edit for update – unfortunately I can no longer find the original pin on Pinterest, so this post doesn’t make as much sense, but you’ll get the idea!]
We travel a lot (or so I thought, until I made this haha), so I thought it would be really cute. We also just moved into our house in December, so we still have a lot of empty wall space to decorate. I thought this cute little handmade map would be unique and a great way to personalize a room.
I followed the original instructions with just a few changes. Here are my materials:
16×20 canvas from Hobby Lobby (I got one there pretty cheap)
A bunch of cute scrapbook paper, if you’re like me you always have some lying around!
A handful of miscellaneous cute small buttons, you can use all matching ones or a hodge podge
Paint for the canvas,
A pack of wooden letters, also from Hobby Lobby
Modge Podge, or another similar clear adhesive glue or spray
Print out of a US map (link below)
A lot of patience and time (to do it, to do it, to do it, to do it right)
Oooh a bunch of scrapbook paper…
I knew it would take me a good while to cut out all these states (curse you, New England). One weekend when the husband was out of town, I had yet another TV marathon (I think this time it was Fringe) cutting out all of the states.
I started by printing out a blown-up map of the US here. I printed to poster size, so the states would be big enough to fit on my rather large canvas. Play with your printer settings to get it the right size for whatever canvas you’ve chosen.
Then, I cut out each state from the map itself (that took forever). Next, I rotated through all my scrapbook papers and traced each state on them using my state cutouts. Since I didn’t have as many papers as I did states, I just made sure to keep all the patterns spread out (does that make sense?). I didn’t want the same paper to be used for two states that bordered each other. Then, I cut out the states on the scrapbook paper.
I painted my canvas blue. You can see in the original tutorial she uses a more neutral beigey color, but I love bright blue and I thought it’d look ocean-y. After it dried, I glued on my states as precisely as I could. I then modge podged over the entire map to give it a nice glossy look and hold down any curling ends of the paper. I used the glue adhesive, but I think spray would be good too.
I debated adding any words or a title to my map. I didn’t really want “Oh the places you’ll go”, which is a Dr. Suess quote the original tutorial uses. We don’t have any kids yet so I just wasn’t feeling the Seuss. I decided on “Wanderlust”. I painted the letters a bright green and glued them on my canvas.
The finishing touch was gluing my little buttons on the map for the places we’d visited. My husband and I agreed on some ground rules. I could only “button” places we had both visited together, and we had to have stayed overnight there (not just driven through). Only one button per state, even if we’ve been to multiple cities, and I put a heart button for the two cities we’ve lived in — Baton Rouge and Houston.
Ta da! Sorry for the crapola picture. Really bad lighting.
Turns out the only states we’ve visited are all the southeastern ones….plus Massachusetts (where the button is practically bigger than the state).
I sort of start rushing when I get tired of working on a really tedious project, so I wish I had taken more time with the letters at the top. I painted and glued them on before they were totally dry and got some green smudges on my canvas…but oh well 🙂
I’m really glad I made this, and I can’t wait to be able to add more buttons to it! Hopefully someday one day it will be full!
And that conclues this week’s Pinterest Thursday!
Do you want to participate in Pinterest Thursday? Feel free to join me and link up at bythebookpaper!